Setting up Airtopia is so simple. What once took 8 hours now takes less than 10 minutes.
Step 1: decide where to install your controller
Recommended installation locations include near the Local Area Network (LAN) router switch or near your air conditioner’s Indoor unit.
Step 2: connect to a power source
Connect a power supply to the unit or connect the output of a Power over Ethernet (PoE) using an Ethernet cable.
Step 3: connect to the internet
Connect a CAT5e Ethernet cable from your LAN router to the controller.
Step 4: install the IR Blaster
Install the IR Blaster adjacent to the IR receiver window of the split system unit and connect it to the Airtopia controller.
Step 5: install the Airtopia App
Download the Airtopia App at app.airtopia.global. Log in and add your controller’s ID to your account (the ID is written on the base of the controller case).
Step 6: synchronise the IR remote
Point the remote in the direction of the controller’s IR Sync window. Press the ‘temperature up’ button on the remote, and the controller will automatically select and synchronise with your air conditioner.