Maverick High Output Theater Series by James Loudspeaker

The Maverick High Output Theater is part of the Awesome, Powerful & Exciting, additions are inspired by the legendary “Mavericks” surf of NorCal! This large format hybrid horn system, was specifically developed for ultra-high output home theater applications where depth is not an issue. The Maverick High Output Theater by James provides ultra-wide bandwidth, very high sound pressure levels and very low distortion – making for a stunning cinema experience. Designed for the customer who wants the best results possible and integrating with high end electronics for only the most mind blowing results

MQ84_iso_WEBrgb

MQ84 / MQ84A

4-Way Full-Range, LCR Array

The MQ84 is a passive, and the MQ84A is 4-way active loudspeaker providing high-output over 50Hz to 25kHz. Ultra high frequencies are handled by the single titanium 1″ (25mm) dome tweeter. High frequencies are handled by the James propriety quad-tweeter array incorporating 4 titanium 1″ (25mm) dome tweeter. The combination produces high-output purely dynamic sound. The mid frequencies are handled by a large format compression driver with a 3″ (76mm) voice coil and titanium dome coupled to a precise 10”x18” exponential horn. Finally, the mid bass frequency band is handled by a pair of 8” (203mm) aluminum cone woofers coupled to a shallow wave guide.

MQS85_ft_WEBrgb

MQS85

4-Way Full-Range, Surround On-Wall

A number of surround options are available to satisfy the unique performance goals of each installation as well as fitting the visual demands of owners, designers and architects. The MQS85 is a wide dispersion, wide bandwidth, on-wall surround in the tradition of commercial cinema designs. Also, 2 versions of the 806BE are available for in-wall installation, in either QX style or normal BE formats. Call for recommendations on other surround options.

M1040BMS_ft_WEBrgb

M1040BMS

10″ Bass Management Subwoofer

The M1040 shallow depth in-wall subwoofer features a sleek modern appearance and James’ all new honeycomb slim 10” woofer, designed to deliver powerful deep bass from an in-wall design. The M1040BMS is primarily intended to be used in large format cinema rooms to increase LF output and, through dedicated DSP, to tune the room for flat bass response, delivering maximum coverage. This sub can also be used as a powerful in-wall subwoofer, designed to fit into a standard 2×6 wall construction. As with all James Loudspeaker’s in-wall speakers, the M1040BMS includes performance that is second to none.

M122_ft_WEBrgb

M122

12″ Dual Subwoofer

For L/C/R or low frequency effects (LFE) use. Each left, center and right stack feature a double 12” (305mm) woofer module to handle from 32 to 150Hz. Bass management is handled by a James M1000 subwoofer amplifier that delivers up to 1000W+.

M213_ft_WEBrgb

M213

21″ Ultimate Subwoofer

The M213 subwoofer uses three 21” (533mm) transducers, a 5” (127mm) voice coil active woofer and two 21” (533mm) passive radiators to provide high output and deep bass.

M152_ft_WEBrgb

M152

15″ Dual Subwoofer

For L/C/R or low frequency effects (LFE) use. Each left, center and right stack feature a double 15” (381mm) woofer module to handle from 25 to 150Hz. Bass management is handled by a James M1000 subwoofer amplifier that delivers up to 1000W+.